How to change the type of Box clamps via the internal page?

Owned by Angel Rivero
Last updated: 20-05-2022 by Sara Darder
1 min read

  1. Access the meter's internal page via the meter's IP address

  2. In the General Options section, open the Current Clamp Size drop-down menu and select the type of clamp that the meter uses from the options:

    • 100 A or less: for 60/100 A clamps, models LTP10 and LTP16, 10/16 mm diameter

    • 300 A: for model LTP24, 24 mm diameter

  3. Click the Apply button to save your changes.

How to access the internal page of the meter?

How to change the type of Box clamps?

Help us improve

Need more help?

If you are unable to complete any of these steps or if you need any further assistance, please contact Wibeee Technical Support.